Skip to main content
added 134 characters in body
Source Link
Andy
  • 3.3k
  • 4
  • 23
  • 38

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs at least eight 3.5" HDD mounts for SAS and two 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300. A tower is preferable. With rack mounted, I'd have to reduce the budget to £200 to factor in some of the cost of rails and a cabinet.

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs at least eight 3.5" HDD mounts for SAS and two 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300.

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs at least eight 3.5" HDD mounts for SAS and two 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300. A tower is preferable. With rack mounted, I'd have to reduce the budget to £200 to factor in some of the cost of rails and a cabinet.

added 5 characters in body
Source Link

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs lots ofat least eight 3.5" HDD mounts for SAS and a fewtwo 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300.

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs lots of 3.5" HDD mounts for SAS and a few 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300.

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs at least eight 3.5" HDD mounts for SAS and two 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300.

Source Link

Case to support EEB motherboard and dual ATX power-supplies

I am looking for a case to support my server build that will consist of an ASUS Z10PE-D8 motherboard and would like to incorporate two ATX/EPS PSU's along the lines of Corsair RM850i.

It needs lots of 3.5" HDD mounts for SAS and a few 2.5" SSD mounts for system drives.
It also needs ample cooling for a dual Xeon E5-2620V3's and 64GB of RAM, as it will run hot.

A 5.25" front housing would be beneficial but not absolutely necessary.

I am looking below £300.