Questions tagged [case]
For questions about protective cases for hardware. Consider using the [enclosure] tag as well.
58
questions
0
votes
1
answer
14
views
smallest pc case for mini-itx
Have a mini ITX ASROCK motherboard at 6.7 inches square. And existing tower is using a traditional ATX form factor power supply, 400 watt or thereabouts.
I want to transplant the motherboard to a new ...
0
votes
0
answers
25
views
New Self Build Replacement PC
Currently I have an Acer Revo One RL85. Physical dimensions are circa 150 mm tall, 100 x 100mm. It is perfect for the size, but has max' 8gb RAM. I am looking to build a new machine.
I want something ...
0
votes
0
answers
23
views
Is "stacking" fans useful for increasing CFM?
I have a tiny n54l HP microserver, its super compact but perhaps to a fault as the airflow isn't great. I was thinking about replacing the existing fan which is about 100cfm with a stronger one that ...
0
votes
1
answer
38
views
Choosing a case for 5090x for heavy duty usage
I am trying to choose a case from the following. I will be using a 5090x with a noctua 15 cooler, need to have space for a future 3080 graphic card and most importantly it needs to able to dissipate ...
1
vote
1
answer
362
views
Small mini-itx case with support for PCIe 4.0 GPUs
I want to build a small factor mini-itx PC for gaming around a motherboard based on AMD X570. Ideally, I am looking for cases <20lt in volume. Slightly bigger cases (<24lt) would also do.
The ...
1
vote
1
answer
51
views
Smallest Footprint PC Case
I am looking for the smallest possible footprint PC Case to house the following components:
Standard ATX power supply - Corsair CX600M
Micro ATX motherboard - Gigabyte GA-A55M-DS2
Dual slot graphics ...
1
vote
2
answers
46
views
Can I install USB 3.0 USB bracket if my motherboard does not support USB 3.0?
I have Gigabyte GA-H61M-S motherboard and it does not support USB 3.0.
My computer case has USB and Audio module but, its not working anymore. So, I am thinking to replace it with a good quality ...
1
vote
0
answers
33
views
Robust Industrial Camera sought which is small enough to fit
For our project, we need to buy a robust industrial cabled camera (ethernet or usb) that is waterproof and has good shock resistance (up to ~50 g force), and has M-connectors (for protection). Also, ...
1
vote
0
answers
30
views
What is this connector locking clips and where to find it?
I have just purchase the HP Elitebook 8570w and disassemble it for cleaning. Unfortunately when I was trying to put it back I broke all three clips locking cables connection touch-pad and fingerprint-...
2
votes
1
answer
126
views
Desktop PC with two 5.25" drive bays
My parents need a new desktop PC, so I was just going to get them one from Dell or HP or some other company that sells prebuilt PCs.
My parents' current desktop PC has two 5.25" optical drives in it, ...
-1
votes
0
answers
13
views
What is the most reliable computer case fan you can buy? [duplicate]
I am trying to buy the most reliable case fan known to man. The Fans noise level can be as loud as it wants. The fan has to have good enough airflow. The fan has to last a long time. Those are really ...
0
votes
1
answer
90
views
What is the most reliable computer case fan you can buy?
I am trying to buy the most reliable case fan known to man. The Fans noise level can be as loud as it wants. The fan has to have good enough airflow. The fan has to last a long time. Those are ...
-1
votes
1
answer
19
views
Is there a way I can build a "modular desk" around this case?
I have a mobility and space issue. I moved from a 5000 sq. ft. house to a 1200 sq ft condominium, and have two computers each sharing the Thermaltake WP200 chassis:
While the machine is on castors ...
0
votes
1
answer
26
views
Is there any mounting standard for prefilled liquid coolers?
I am trying to find and buy cheap computer case with 2 fan liquid cooler. Like this:
However, I've been having trouble finding cases that fit this description:
With "liquid cooler" keywords I found ...
0
votes
0
answers
209
views
Looking for horizontal PC Case that fits into this furniture
I'm looking for PC horizontal case that will fit into this
It is hard to find one. So I'm looking for the horizontal PC case that will support:
front intake 140mm fans with dust filter
back 140mm ...
3
votes
1
answer
48
views
I carry a lot of stuff in my backpack. How can I protect my laptop? [closed]
I have a backpack full of heavy stuff, and a laptop that I don't want to break. I have noticed an outline of the keyboard on the screen, so it's clear I have too much weight in the wrong places. There ...
1
vote
1
answer
102
views
Nano case for Hp 110 250 Series Motherboard 762025-001
I am searching for a case that is as small as possible but can fit a Hp 110 250 Series Motherboard 762025-001 and a HDD or SDD (and maybe a case fan).
The motherboard has a build in energy supply so ...
0
votes
0
answers
113
views
compact (and aesthetically pleasing/professional looking) NAS case with 6-8 hot swap bays
I'm looking for a case for my home NAS.
I'm thinking about 6-8 drives; I don't have a specific need for hot swap drives, I just like that design.
What I have in mind something like a FreeNAS Mini, ...
3
votes
0
answers
15
views
Looking for good external RAID enclosure
I am looking for an simple external RAID enclosure that meets the following specs:
3x 3.5" or more
RAID5
JBOD
compatible with 12 TByte drives
compatible with Linux
average performance
not very loud (=...
2
votes
1
answer
48
views
Hard disk case, similar to the included image
The quality of portable hard disks have been underwhelming for me, so I want to use datacenter hard disks to store my data (Some of my data are being accessed and overwritten frequently, so I need ...
3
votes
1
answer
73
views
Consumer/gaming-oriented case with high-end "big iron" server-level build quality
The few times I've encountered server gear, the build quality simply amazes me. It's just remarkably well-built, with incredibly solid metal construction throughout. The quality of the front of the ...
0
votes
1
answer
133
views
Tilted motherboard (45 degrees) - is it safe for the long term? [closed]
I am making my own case and wish to have the motherboard mounted with an angle 'forward' so that the motherboard would be hanging somewhat more than in the regular 90 degree mounting position.
But I ...
0
votes
1
answer
87
views
ATX case with far holes for 3.5' HDD
I am searching for a ATX case with proper mouting holes for the new high-capacity 3.5' HDDs. (seagate archive 8TB).
All atx cases have mounting holes only for middle screws and cannot properly mount ...
0
votes
1
answer
36
views
Drop resistant iPhone 6 battery case
I drop my iPhone 6 a lot but also need that extended battery and wired headphones.
Is there a life proof that has a battery or that fits on top of the Apple Battery Case? Alternatively a battery ...
4
votes
2
answers
1k
views
Mini-ITX case with 10 SATA hot swap bays
Mini-ITX boards with 8 to 12 SATA connectors aren't that exotic. But what about matching cases? Basically, I am looking for something similar to the SuperChassis 721TQ-250B - but with more hot-swap ...
0
votes
0
answers
33
views
A very large computer case
So, now I have HAF X case, ASUS Rampage IV, and a 1080Ti video card.
All fine and well, except I can't fit the video card into the second x16 PCI slot because of the case back panel hinge. So I need ...
3
votes
0
answers
67
views
Pixel 2 XL multi function dock, or fitted sleeve
I have a Pixel 2 XL preordered which is intended to be a development and testing workhorse which will be connected to all sorts of devices in vehicles, at desks, in the field. I need a dock for it.
...
0
votes
0
answers
28
views
choosing motherboard and 1U server case
I've got my eyes set on the Ryzen 5 1600x cpu. I'd like to install it in 19' rack, using 1U space.
What chassis and mother board do you recommend? Will I need to purchase a separate cooler? I wont ...
3
votes
2
answers
191
views
Workstation for Deep Learning in Pakistan
I need to buy or build a machine for my research in Deep Learning and Computer Vision. I read in some tutorial about building a machine for Deep Learning, it suggested using a CPU with minimum 8 Cores,...
2
votes
0
answers
30
views
Small Case for full size graphics card + swappable hdd
I am looking for a small case with the following requirements:
Hardware that should fit in:
ASRock H77 Pro4/MVP, Sockel 1155, ATX
Gigabiyte Radeon HD 7950
4 HDD + 1 SSD
be quiet! Pure Power L7 530
...
0
votes
1
answer
484
views
Why are these Micro-ATX motherboards different sizes [closed]
I just bought a new case that is made for mini or micro atx motherboards. The Bitfenix Prodigy M.
At first, I got an MSI B150M Pro-VD Micro ATX motherboard, and it wasn't ideal because I got a ...
3
votes
1
answer
55
views
Desktop case that allows powering up only one of two HDDs/SSDs
I’m looking for a case for a desktop computer. Or for something to insert into a case.
No restrictions/requirements yet (so format/size/slots don‘t matter), except for this:
I want to use two 3.5-...
1
vote
1
answer
40
views
PC Chassis for MSI Motherboard?
I'm building my first Gaming computer, and I need some help deciding which case to get for my motherboard of choice. The motherboard I have chosen is the MSI Z270 Series Gaming Motherboard (link). The ...
0
votes
1
answer
493
views
Compact mATX case for NAS system with four 3.5" drives
I'm looking for a compact mATX case for a NAS system. One that I can stick in a corner somewhere and forget about (figuratively).
I have done some research into this, but all results I found that ...
1
vote
0
answers
45
views
Case fan that works with the motherboard controls
Im after a case fan that i can use with the motherboards controll. I currently have
Current configuration
Coarsair carbide 100r silent edition http://www.corsair.com/en-au/carbide-series-100r-...
2
votes
1
answer
86
views
Battery case with data throughput
I have a Nexus 5X, that I use to connect to my drone with the DJI Go app. I plug my phone into the drone's remote controller through the USB C port on my phone. (Same concept as plugging into a ...
1
vote
1
answer
318
views
Remedies for new PSU not fitting into old case (but with extraneous space so it could be made fit)
I had an old PC (the build was originally a Siemens Celsius 460 workstation) whose case I wanted to strip apart and supply with newer components. For most components (those with standardised sizes, i....
1
vote
0
answers
450
views
What are the smallest mini-ITX cases available? [closed]
I want to build a PC as small as possible, so I'm considering a mini-ITX build which support dedicated graphic card. In fact I don't need a graphic card right now, but just in case I will need one in ...
-3
votes
1
answer
207
views
Case fans: on PSU or SYS-FAN splitter? [closed]
A week ago I built my new pc. The case came with 2 in-built 3-pin case fans, and my motherboard only has one 3-pin SYS-FAN connection. One case fan is in top-rear of the case, and the other fan at the ...
5
votes
0
answers
64
views
Server case upgrade?
I am building a new server. The existing server has what I consider a very nice case (for my needs). It is 10 years old but in like-new condition.
I want some advice on keeping that case and PSU (...
3
votes
1
answer
547
views
Best case for z170A M7 and Corsair Hydro H100i V2
I'm currently search for a new custom PC and one of the hardest part to me is to choose what case should i go to.
I'm looking for a case that can fit perfectly the motherboard MSI Z170A M7 and the ...
1
vote
2
answers
81
views
Quiet desktop PC refresh
My primary desktop PC is due for a refresh.
I have always built my own, but I might have reached the point where it's worth the extra ~$100 to buy a pre-built machine. The biggest reason I haven't ...
2
votes
0
answers
14
views
Something to protect a Nexus 6p while allowing a wallet? [closed]
I've got a Nexus 6p with a stretch fabric wallet attached to the back. This is great for storing credit cards since I don't carry a regular wallet, but it does make it difficult to pick a phone case, ...
0
votes
1
answer
895
views
How do I use the Phanteks fan hub with Corsair H110i GTX [closed]
I recently built a new computer, and I'm having some issues (I think).
Here's my gear
Case: Phanteks Enthoo Evolv ATX
Case Accessory: Phanteks fan hub
Mobo: Asus Maximus VIII Hero
CPU Cooler: ...
2
votes
1
answer
164
views
What Current Motherboard Form Factors Will Fit An LPX Case?
I have an all in one PC from the mid-90s (Compaq Presario 3020 - See below).
Based on the riser and from what I can measure (9" x 13"), it looks like an LPX form factor motherboard/case.
I want to ...
4
votes
0
answers
25
views
Carrying case for a device and some accessories
I'm looking for a storage case for the following collection of items (not including the ruler, which is just for reference in the photo):
The item on the left is a USB KVM adapter, it is about 1" ...
9
votes
2
answers
98
views
A new case for an old build
When I built my PC a year ago, I bought a really cheap case. It did not have USB 3.0 or audio on the front panel, and I regret it now. I already have new case fans for the thing, and it runs quietly, ...
4
votes
1
answer
235
views
Choosing source of light in case. LED stripes or cold cathodes?
I ordered a new case for my ITX build it's
Phanteks Enthoo Evolv ITX (white).
I want to light it with cold white light but I have to choose a source of light. I have two favourites (both powered by ...
4
votes
0
answers
45
views
Small security enclosures
I work in a co-working space and keep a small NAS, a micro-PC, a router and a few other small components running on my desk. While it's a safe space I'd like to add a bit more anti-theft security. ...
0
votes
2
answers
136
views
My gaming build - any suggestions? [closed]
Before you ask why I would spend around $800-850 dollars on a pc, it is just for a video. I'm not actually buying the parts. (Though I wish I could build it; as I never got to before)
I'm making ...