2

An ATmega328 has three timers, one of which, Timer1, is a 16 bit timer. The Arduino Uno and Nano both use an ATmega328. As you say that you have a A4988 module, then an Arduino Uno with a CNC driver shield would be a simple option: A smaller option would be an Arduino Nano with a CNC board: You could power it via a LiPo, using a TP4056 module, which has ...


1

A typical solar panel electrical package will include a series of solar panels (rating and quantity based on expected load), a charge controller, a battery bank (rating and quantity based on expected load) and an inverter (yes, rating based on expected load). If you are confident that you will need 1000 watts of power, you should be configuring your system ...


1

Powering USB devices with solar is pretty easy, powering laptops is much harder. You really see the difference in power needs when you are trying to charge them yourself like this. I'm based in a country with an unreliable power supply but good sun with a setup that can keep my portable PC charged for about 7-8 hours a day without going to too much trouble. ...


Only top voted, non community-wiki answers of a minimum length are eligible