Questions tagged [motherboard]

For questions relating to the main control and interconnection component of a computer. Beware - a number of questions on this subject are off-topic.

Filter by
Sorted by
Tagged with
0
votes
1answer
16 views

Looking for a compatible M.2 drive for my motherboard [closed]

I'm looking to get rid of my old HDD (my xbox HDD is dying so prob put it in that) and replace it with an SSD. I would like to make use of the M.2 port on my motherboard if I can. This is my ...
0
votes
0answers
2 views

Which 1 or 2 ATX PSUs for Asus dominus extreme motherboard?

For a build with a Xeon 3275, Asus dominus extreme, and 4 Nvidia Titan RTX; Should I take 1600W PSU or two 1000W PSUs ? There is a dual 24-pin on the motherboard: is it mandatory ? for which usage is ...
0
votes
2answers
28 views

Can I put 2 x 4 GB of DDR3 1600 RAM where I currently have 2 x 2 GB 1333 RAM?

I have a fairly old motherboard - a Pegatron Narra6 M2N68-LA - and when I google for it, I get this page on hp.com: https://support.hp.com/us-en/document/c01925534 I currently have 2 x 2 GB DDR 1333 ...
1
vote
0answers
5 views

cheapest OpenCV board

I'm working on a small project that require computer vision boards. As many as possible. Wifi ability is not necessary, I can get ESP8266-01s with a dollar. OpenMV is too expensive and not easy to ...
0
votes
0answers
21 views

Is there any motherboard that supports Ryzen 3xxx out of the box?

I am thinking on building a computer. I would like to use one of the new Ryzen CPUs, probably the Ryzen 3600. The problem came up when I had to pick the motherboard. Most motherboards support the new ...
0
votes
0answers
5 views

What is the best Micro Atx motherboard for my build with only 2 ram slots and an M.2 SSD slot?

My concern is, I am not sure if the boards i'm looking at is compatible with the Ryzen 5 2600. I am mainly using my computer for games and work so I think I do not need more than 2 ram slots and only ...
1
vote
0answers
22 views

GA-B150M-D3H motherboard and PCIe NVMe 3.0 x4 ssd [closed]

GA-B150M-D3H - https://www.gigabyte.com/Motherboard/GA-B150M-D3H-rev-10/sp#sp : Storage Interface: 1 x M.2 Socket 3 connector (Socket 3, M key, type 2242/2260/2280 SATA & PCIe x4/x2/x1 SSD ...
1
vote
1answer
10 views

What type of esata cable should I buy to connect to this port on my MB?

My motherboard AX370-Gaming K5-CF has 2 Sata Express ports as depicted in the manual in page 17 between the normal sata ports. http://download.gigabyte.eu/FileList/Manual/mb_manualga-ax370-gaming-...
1
vote
1answer
29 views

What is the most affordable motherboard that fits my needs?

My problem is that my computer keeps freezing then my monitor loses signal shortly after when I play games. I am really desperate to fix my computer i've exhausted so many options from running Furmark ...
0
votes
0answers
15 views

Hardware specification for Deep Learning research

I need a Desktop computer for Deep Learning research work with large datasets. The models of Deep Learning may be huge and complex, so they may need heavy computations. My budget is INR 250000 i.e., ...
0
votes
1answer
16 views

Processor replacement [closed]

I have a problem with a pc using intel core i7 gen 4. And would like to test it with other pc that using i5 gen 4. Is it Match vice versa with the mother board? And how about the driver installed in ...
-2
votes
1answer
45 views

Recommendation for small, low-cost, low-energy, fanless, 80686 or x86-64 computer with at least 3 SATA ports using normal connectors instead of mSATA

Per the post subject, is there an x86 computer like this that I can still buy or otherwise acquire in 2019? Used or refurbished is OK as long as it is still reliable. I want a low-cost, low-energy, ...
1
vote
0answers
19 views

Where are VRMs on this Asus M5A78L-M/USB3 motherboard?

I am planning to move an Asus M5A78L-M/USB3 and its FX-6350 CPU (default TDP 125W, max temp 61C) into a new chassis with a GeForce 1070 and a 680W power supply, but based on remarks here and elsewhere,...
1
vote
0answers
14 views

Suggestioned upgrades for a old Dell Studio XPS 8100

I have been meaning to upgrade my desktop though i am not sure what would be best. Though admittedly i have not kept up to date with hardware so i am completely green in regards to where my specs ...
0
votes
0answers
5 views

PSU for ASRock x399 fatality

I recently purchased Cooler Master MPY-7501-AFAAG-US MWE 750 Gold Full Modular, 80+ Gold Certified 750W Power Supply (https://www.amazon.com/gp/product/B07JW7M3VX/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=...
0
votes
2answers
19 views

2 different RAM in same motherboard?

I am assembling my first PC. I have an Asus B450M-A motherboard. I bought 2x8GB 3000MHz RAM "Vengeance LPX" sticks from Corsair on Amazon, but since I received 2 fake chinese dusty crappy 20 years ...
0
votes
1answer
14 views

New motherboard and 2 8gb sticks or current motherboard and 1 16gb stick?

I have the H110M motherboard with 2 4gb sticks of RAM, the motherboard has 2 memory sockets and I wanna increase my memory. Should I buy a new motherboard with 4 sockets and then 2 8gb ram sticks, or ...
0
votes
0answers
10 views

Looking for a case for Asus p10s-c/4l motherboard

I am willing to buy an Asus P10S-C4/L but because of the 4 LAN ports, I do not know if it would fit in a standard ATX case. Otherwise, which case would be compatible with this motherboard ? Regards!
0
votes
1answer
52 views

Z390 motherboard that supports two 4K monitors

I'm trying to find a Z390 motherboard with built-in support for two 4K DisplayPort monitors. I can see that many have USB-C but I can't find any info if any of them support DisplayPort over that ...
0
votes
0answers
8 views

Looking for a nonUEFI motherboard [duplicate]

I'm looking for a motherboard that does not have UEFI. So far I been been unable to find any. It is for a system that will be running a bare bones Debian or Gentoo system. Its speed and compatibility ...
1
vote
0answers
15 views

Need help finding Serial connector card for my motherboard (PCI/E to RS422) [closed]

My Motherboard is missing (HP EliteDesk 800 G3 TowerPC ) Serial port. I have 2 black slots of PCIE empty (named X1PCIEXP1, X1PCIEXP2 on the motherboard) and a yellow PCIE slot empty (named X4PCIEXP). ...
1
vote
1answer
34 views

Motherboard + NIC advice for dev/research workstation

I'm looking for hardware configuration pieces of advice. I'm having 2 computers, one hyperconvergent server, and one workstation for which I'm planning the hardware. The workstation will be for dev ...
0
votes
1answer
13 views

Searching memory for motherboard and existing memory

I have a Gigabyte F2A88XM-HD3 motherboard which has 4 memory slots. In two of these slots I have two Corsair CMV8GX3M1A133 1333 Mhz DDR3 8G modules. I have found https://eu.crucial.com/eur/en/...
0
votes
0answers
18 views

Motherboard that supports hardware RAID for M.2 PCIe Gen3 x4 cards

I am looking for a motherboard that supports hardware RAID for NVMe M.2 2280 PCI-Express 3.0 x4 cards.
0
votes
1answer
40 views

Will a non-ECC memory work with motherboard and CPU that supports ECC?

I have this two components that support ECC memory: AMD RYZEN 3 1200 AMD RYZEN MSI B450M PRO-M2 On the other hand I have this memory 4 GB DDR4 2400 KINGSTON VALUE CL17 Questions Are they going to ...
0
votes
1answer
35 views

Picking the right memory, psu and mobo for a ryzen 2700x + gtx 1070 ti non OC build? [closed]

MOBO I don't fully understand all the subtle differences between different mobo models. I know 470x supports SLI and think b450 doesn't. I also know some mobo models have wifi, faster Ethernet and/or ...
1
vote
2answers
76 views

Hardware upgrade after a long time: which MB, RAM, CPU, and GPU? [closed]

Time to upgrade my desktop PC, which - unlike most people - I do very rarely, which also means that I'm currently quite out of practice with buying new HW. My computing and graphics needs are not ...
0
votes
2answers
31 views

Should I stick to AM3+ or upgrade to something else? [closed]

My motherboard just died on me, and I am wondering if I should just stick to the same kind of motherboard (AM3+). If i do I would be able to reuse the cpu, ram, and psu for a bit longer. Is it even ...
0
votes
1answer
176 views

Gigabyte motherboard M.2 B450 DS3H specification grammar [closed]

I'm newbie with pc-building and I found the gigabyte's page of the product this: 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) * Supports only ...
-1
votes
1answer
42 views

Why aren't there motherboards with boatloads of m.2 slots? [closed]

It would seem to be physically possible to fit dozens of m.2 slots on a motherboard. Why can't I find a motherboard with more than 3? Surely servers would have a use case for more than 3 m.2 ssds?
0
votes
1answer
55 views

How do I optimize performance of a 2700x without OC? [closed]

I've been reading up on VRMs, heatsinks, et al. on modern boards (e.g. b450, x470), and I'm a bit lost. The 2700x, as you know, has XFR and can make use of PBO, and according to reports, this means ...
0
votes
0answers
24 views

Looking for very energy-efficient (<30W) mini-ITX mainboard, ideally with 7th gen Intel support

I live off the grid, with an office powered only by solar panels. My main work machine currently is a Macbook Pro. For various reasons, I want to ease off it and build a small, extremely energy-...
0
votes
2answers
32 views

Advice on graphics card [closed]

I'm looking to upgrade my computers graphics from integrated graphics to a dedicated graphics card. My question is two fold: Is this the PCI Express slot? With an AMD A10-7800 Radeon R7, 12 Compute ...
1
vote
2answers
41 views

ATX Power Supply Unit with one/some Always-On Molex Connectors?

I know (current) ATX PSU will turn off its power after the PC shutdown. This is good. I know (old) AT PSU will leave its connectors with power on even after the PC shutdown. Ref: https://en.wikipedia....
0
votes
1answer
65 views

replacement rgb led strips for asus aura sync?

The Asus ROG RGB LED strips are fairly expensive, are these strips replaceable with a different RGB LED strip such as this one? If not, what am I looking for in a less expensive replacement? I see ...
1
vote
2answers
65 views

Adding RS232(Serial Port) to motherboard [closed]

I need to add a RS232(Serial Port) connection to my pc, and unfortunately I'm unable to use RS232 to USB adapter, only direct RS232 connection, I have seen this item: https://www.aliexpress.com/item/...
1
vote
1answer
41 views

Pairing RAM stick with one that is soldered on the motherboard [closed]

My laptop is the ASUS F556UA-UH71, and its motherboard number is the X556UAK. It has 8GB of RAM soldered on the motherboard itself with the following specs: DDR4 2400MHz, timing: 15-15-15-35. Mind you,...
3
votes
1answer
36 views

Deep Learning Hardware (PC/Ubuntu)

I have checked a few questions here regarding the GPU and bought the 1080Ti. Now I am trying to figure out the rest of the configuration and it should be below 1000$. I have seen that i5-8600K sounds ...
1
vote
0answers
20 views

What type of motherboards should I use to build a system with 8 Intel Xeon E5520 Processors? [closed]

I was given 8 Intel Xeon E5520 processors. I would like to build a parallel computing system for simulation and data processing. What type of motherboards should I get to build this system? It ...
1
vote
1answer
83 views

Nano case for Hp 110 250 Series Motherboard 762025-001

I am searching for a case that is as small as possible but can fit a Hp 110 250 Series Motherboard 762025-001 and a HDD or SDD (and maybe a case fan). The motherboard has a build in energy supply so ...
1
vote
1answer
20 views

Advice for what wireless card to buy for old motherboard

I have an old gigabyte GA-P35C-DS3R motherboard. On it there is also written "FSB1333 Multi Core CPU...". I want to install a wireless card, but I am not sure on what models are compatible because I ...
-1
votes
1answer
25 views

My computer restart it self before bios(how to re-program the bios) [closed]

Yesterday I cleaned my pc, removed RAM, disk, and cpu fan(not cpu). After the clean-up I re-connected all the components again only to find out that the computer starts but reboots after a few seconds(...
0
votes
1answer
18 views

Connect extra fans to an ASRock Extreme4 [closed]

I have a ASRock Extreme4 motherboard and would like to add one or two extra fans to my current rig (Carbide Air 740). But I do not know where to plug in the fan, and I'd rather not unlpug another fan ...
0
votes
2answers
42 views

What is a perfect motherboard for my budget build I3 8100 + GTX 1050 TI 4 GB?

I find on Google about the motherboard for I3 8100 + GTX 1060 but it keep saying about Asus - Prime Z370-P ATX LGA1151 Motherboard, which is a near high-end motherboard at $120 for Intel Core I7 which ...
0
votes
1answer
64 views

Intel i9 7980XE Are these parts compatible? [closed]

I am looking to go big on cores and have bought the Intel i9 7980XE 18 core processor. I'm trying to find a sane list of parts that will be compatible - I haven't built a computer for about 10 years ...
3
votes
1answer
82 views

Reduce CPU Fan Noise on old AMD Athlon XP 1900+

I have an old PC Desktop running Linux lubuntu 17.10. It works well, but the noise of the CPU FAN is too high, and I would like to reduce that to almost nothing if possible! The hardware is : CPU: ...
0
votes
0answers
59 views

Best motherboard for simulations and AI's

I am creating a semi-compact computer desk with a computer built into it. Although I have many questions about this subject, I believe it is best to start with the motherboard. The computer will be ...
0
votes
1answer
66 views

Tilted motherboard (45 degrees) - is it safe for the long term? [closed]

I am making my own case and wish to have the motherboard mounted with an angle 'forward' so that the motherboard would be hanging somewhat more than in the regular 90 degree mounting position. But I ...
1
vote
1answer
75 views

Does this CPU fit with the GPU?

Apparently this CPU is a bad combination with my GPU; I have been told that they will not work together. These are the main parts: AMD - Ryzen 7 1700 3.0GHz 8-Core Processor (No overclocking so do I ...
0
votes
0answers
24 views

Graphics card and Power supply for architecture and 3d Modeling

I have a friend who is an architect and now is looking to build 3d models. He needs a new pc for fast 3d rendering and architecture related work. Here is a list of components that I recommended. ...