I'm adding a 7200rpm 3TB data drive to my desktop. I have a long list of drives with 64MB cache and SATA-3 connectors, but what I really want to know is which will be quiet – in particular the read/write crane movement. I've had everything from drives that sound from the other side of the room like marbles rattling around in a cement mixer to drives so quiet that I have to press my head against the case to hear that the heads are moving. Since there are a large number of makes and models of drives that satisfy my performance specs, how can I select ones that are likely to have quiet R/W performance?

  • 1
    I know you already have some answers, but for me I've found that using rubber grommets supplied with the drive caddy work wonders. My Fractal Define R5 has 4x 500GB 7200 RPM drives in, and I can't hear any of them clicking away. Commented Oct 31, 2017 at 16:05

2 Answers 2


It's a bit tough finding exact decibel ratings on different hard drives, in general the dbA is not listed under the hard drive's specifications. But I did find one site where sound measurements were taken. The only issue is, it may be a little outdated (October 2014 was it's last update). But, if we assume that the manufacturers and model types are similar in sound to the ones on this page, it seems that Seagate Barracuda's make the least noise. There are also some other options if we go by the chart I linked to above, so if the Barracuda isn't a good fit, you could go by some of the other ones listed.

That being said, I also did find some HDD "silencers" which would effectively allow you to use any HDD you'd like, although it would take a little bit more fuss. I found a very nice looking one here. There are also other dampeners from the same site here.

  • The Seagate Barracuda 3TB is quiet, but it's also extremely unreliable. Backblaze's reliability study shows a 30% failure rate, and I'd love to know how they got it that low -- my personal experience is a 100% failure rate (six drives from three batches, none lasted more than two years).
    – Mark
    Commented Jul 1, 2016 at 22:20
  • Also adding some sound dampening material to the side panels, as well as bottom and top of the case helps as well, and is an inexpensive fix. If all else fails, one could just use old egg cartons and make a partial anechoic chamber for the case. Commented Oct 20, 2016 at 18:14

On further research I found several claims that 3.5" 7200rpm drives are a lot harder to keep quiet than sub-6000rpm drives, and that there is no longer a significant performance benefit from the higher platter speed (I suppose because data density is so high that the linear speed under the head is no longer a limiting factor?).

So I expanded my search to 5900rpm drives and found an $80 Toshiba DT01ABA300V that includes "low acoustics" under its design features.

I put it in my chassis and have been running it for a few days and haven't heard a thing. So for quiet this does the trick! (How is its R/W performance? Well I use a SSD for O/S and programs, so I don't know if I would notice even if it were markedly deficient....)

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.