1

I'm from India, Please recommend me a NIC card or a website that can be used to find out about this,

Specification/Requirements:

  1. Supported speeds: 10Gig
  2. To be used for PCIe x1 Lane
  3. Copper so RJ45 jack.
  4. Available in abundance.
  5. Longer EOL.

Software:

Better EOL Readily available

2 Answers 2

1

INTEL X710-DA2

https://ark.intel.com/content/www/us/en/ark/products/83964/intel-ethernet-converged-network-adapter-x710da2.html

you will need the corresponding SFP to plug a rj45 cable in

https://www.intel.com/content/www/us/en/support/articles/000007045/ethernet-products/700-series-network-adapters-up-to-40gbe.html

your comment below: I'm actually looking for x1 lane, these only support x8 lanes

https://www.cgdirector.com/guide-to-pcie-lanes/

PCIe Bandwith   Transfer Rate   Bandwidth x1 (per lane)   x4          x8           x16
PCIe 1.0        2.5GT/s         250 MB/s                  1.00 GB/s   2.00 GB/s    4.00 GB/s
PCIe 2.0        5GT/s           500 MB/s                  2.00 GB/s   4.00 GB/s    8.00 GB/s
PCIe 3.0        8GT/s           984.6 MB/s                3.94 GB/s   7.88 GB/s    15.75 GB/s
PCIe 4.0        16GT/s          1969 MB/s                 7.88 GB/s   15.75 GB/s   31.51 GB/s

you said a 10gig nic card, to get 10gbps you cannot do that with just 1 pcie lane. The X710-da2 nic card is pcie 3.0 x8 lane, shown as 7.88 GB/sec bandwidth which is 7.88 * 8 = 63 gbps. If you had a x1 pcie 3.0 nic card then 0.9846 * 8 = 7.87 gbps so while the NIC card could transmit across cat6/7 cable at 10gig speeds the motherboard wouldn't be able to send it data fast enough over just one pcie lane. So I don't think you will find a pcie 3.0/4.0 x1 NIC that is 10 GbE.

And a quick search I don't really see any PCIe 4.0 10GbE NIC's, and what little I do see refers to them being x4. Also network is duplex so also divide by 2. so a pcie 4.0 x1 @ 1969 MB/s = 15.7 gbps but for duplex network that'll max out at 7.87 gbps. So at best you might find a pcie 4.0 x4 nic that's 10GbE it would at least I think be physically possible.... whether anyone ever makes one I dunno. I suspect they would simply standardize on NIC's using 8 pcie lanes, especially when NIC's now almost always have more than one rj45 port.

3
  • Thanks for the reply, I'm actually looking for x1 lane, these only support x8 lanes
    – jatinBatra
    Apr 5 at 6:33
  • overclock.net/threads/…
    – ron
    Apr 5 at 17:50
  • Thanks,I do have a x16 port, So, I've started looking into the x500 series-based controllers.
    – jatinBatra
    Apr 7 at 14:21
1

I've been working with these a while. I picked up a pair of X540-T2 - they're 'server' cards, so run a little hot, though there's a version with a fan. The T suffix means native copper support so you don't need a SFP.

They're PCIe 2.1 x8 for TWO ports, and you can run a single port at full speed (tested by speed test) on a x4 slot with no issue. The x550 is a newer version that'll work on x4, but I've not found them cheap on the secondary market. They're about 90usd + shipping on aliexpress, but prices vary wildly. They are EOL but the current intel drivers support them. They won't downgrade to 2.5 or 5 gbps, so you'll need a 10gig copper capable switch or connect them directly. On windows the drivers are excellent and easy to use, and as older cards they're well understood. They have a mild tendancy to overheat, so run it on a system that's capable of cooling it. While both these cards are "obsolete", they're common and supported with current drivers.

I've not tried it yet, but most modern low cost 10Gbps cards are based off Aquantia chips - they'll work with the 'slower' multigigabit standards and are about the same price as my x540 for a single port. They do PCIe x4 and seem a better option in quite a few ways. I believe asus sells one, as well as various chinese vendors like comfast.

5
  • Reflected in my answer. They're still supported by current drivers, and frankly - if not for the aquantia cards dropping in price since I got em earlier this year, probably the best value. You also save a bit on getting a SFP with all of these options Apr 11 at 17:03
  • intel says it's pci 2.1e and x8, and other than being discontinued it's probably a best buy 10GbE card that does regular rj45 cat 6 versus needing an SFP like you said. The only discrepancy is the guys request for a pcie x1 10gbe card which i don't think is physically possible, if he wants 10gbe i think it'll be doing x8 pcie at minimum.
    – ron
    Apr 11 at 17:19
  • Nope. Best we have now is x4. And yeah, it's basically the current equivalent to those mellenox cards folks were getting cheap a few years back. Old but still usable Apr 11 at 17:21
  • Thanks for answering, I got the x540-T2 as well. It's x8(Turns out I had an x16 port in production so, having x8 is not an issue.) Well now building driver support for this. Let's see how it works. Thanks again
    – jatinBatra
    Apr 25 at 8:13

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.