9

I want to build a home-made multi-room home sound system.

I'm looking for a single board computer device with a minimal hardware configuration. In my thoughts, my only requirements are:

  • Wi-Fi connection;
  • Audio output;
  • Push button to config wireless network through WPS;
  • An LED to show current network status;
  • Optionally, an RJ45 connection for development through SSH.

Actually no video output is required, nor additional USB ports.

What could be the cheapest solution for my needs?

  • 2
    WPS is bad, m'kay? security.stackexchange.com/questions/33283/… – Agent_L Dec 15 '15 at 11:20
  • would something like the chrome audio dongles work for you? – Journeyman Geek Dec 15 '15 at 12:39
  • @Agent_L mmhmh no.. WPS pin is bad, WPS push button is fine. Please read more on WPS.. – Jack Dec 15 '15 at 15:26
  • @JourneymanGeek thanks for hint, it is a nice toy, and even if not intended for a multiroom use, it can probably be adapted for this purpose. Anyway I'm curious to find solution below 39€. – Jack Dec 15 '15 at 15:51
  • @Jack WPS anything is pretty bad... it's being retired because it's superseded by the greater security offered by WPA2-PSK. Though it is at least better than WEP. – ArtOfCode Mar 6 '16 at 22:23
4

I'm looking for something similar to this myself; currently I'm using a CHIP from NextThingCo; you'd have to write the software yourself for what you want, but it runs standard linux.

  • Wi-Fi connection
    • CHIP can connect to two wifi networks (or provide one). There's no ethernet, however.
  • Audio output
    • CHIP has a TRRS jack
  • Push button to config wireless network through WPS
    • CHIP can program two of the gpio pins for this
  • An LED to show current network status
    • There's a shell script for that at thom-nic/chip-network-status-led
  • Optionally, an RJ45 connection for development through SSH
    • run an ssh server
    • install a serial driver and connect it to your computer with a USB cable
    • usb keyboard/mouse and video output via TRRS/hdmi/vga

Items:

  • CHIP: $9 + ~$5-7 s/h
  • Power adapter: 2amp usb charger
  • Recommended: small power bank or lithium battery
  • Optional: case $2

This works fine for me with gmrender-resurrect, though I compiled it myself rather than installing from the repo. Currently I'm looking for something slightly more powerful that I can run BubbleUPnP server on as well, for transcoding (it doesn't seem able to start up).

3

Your best bet is one of the Rasbperry PI 2 or 3 is $35 The PI 3 does actually have built-in wifi, but no WPS button or activity leds. They both have a RJ45 for hard wiring with activity leds.

You need a 5V adapter,SD card, USB wifi adapter and shipping and handling will bring the cost up a bit more.

Give up on the WPS and wifi activity leds and save $10-$20. You can then get a USB dongle if you really need a WPS dongle and wifi activity leds.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.