1

I am unable to find one.
And below 2TB this doesn t gives advantages over ssd in size.

  • What research have you done? Have you checked sites such as PCPartPicker which let you filter? I see they have a Seagate 2.4TB 10k (ST2400MM0129) – A C Dec 25 '19 at 18:59
  • @AC this seems to be about used/refurbished hard drives. And according to seagate your model is a 7200rpm one. – user2284570 Dec 25 '19 at 21:39
  • If the "this" you refer to is PcPartPicker.com, then no, they're not about used items (though they might have listings for refurbs if the sites they scrape are listing those). I don't, however, see very many options larger than 2TB. I'm kinda surprised, actually, so +1 for the question as I'm interested in why that's the case. (And FWIW, according to this datasheet, that ST2400MM0129 is a 10k drive - I don't know, there may be a 7200 version as well) – A C Dec 26 '19 at 2:16
  • Yes, the WD VelociRaptor 1TB, which is currently rank 1 HDD at the 1TB range according to hdd.userbenchmark.com. – Bennett Yeo Dec 26 '19 at 4:56
  • 1
    @user2284570, As the question is written right now, it's barely on topic since it's not explicitly asking for hardware recommendations, just whether the drives are still in production or not. We can infer that you are looking to buy one of these drives and want us to suggest models that are high RPM. Tell us your other requirements for the drive up front and you will get answers that are actually useful to you. – Romen Jan 3 at 19:05
1

There are only three companies that make hard drives these days; everyone else is just re-branding something produced by one of these three. There's basically no market for high-performance hard drives these days -- even the fastest hard drive can't compete with an SSD -- and so nobody makes a 10k RPM consumer-level hard drive. You've got only two options for a drive that's larger than 2 TB:

  • A Seagate Exos 10E2400 2.4 TB hard drive, model ST2400MM0129, $350 or more.
  • A Toshiba AL15SEB24EP 2.4 TB hard drive, $420 or more.

These are both enterprise-grade hard drives, in the 2.5" form factor (2.5" gives faster seek times than 3.5" at the cost of reduced throughput), with SAS interfaces.

I can't recommend either of them: at that price range, you can get an SSD with similar capacity and vastly superior performance, without needing to worry about finding an SAS adapter card for your system.

| improve this answer | |
  • The same I m unable to find a 4Tb M.2 drive. – user2284570 Jan 3 at 18:25
  • If you're looking for a 4TB M.2 drive, you've got one option: the Sabrent Rocket, MSRP of $900. It's about 12x faster than a hard drive for sequential reads, and 6000x faster for random reads. If you're willing to relax your capacity requirements to 2 TB, you've got dozens of options; if you're willing to use a SATA interface, you've got about a dozen. – Mark Jan 3 at 21:53
  • Is there an even larger M.2 drive? – user2284570 Jan 4 at 0:09
  • 1
    Not right now. As a general rule, if you want capacity, you buy a hard drive, if you want speed, you buy an SSD, and if you want both, you spend extra for a hybrid system that uses an SSD to cache the most-used parts of the hard drive. – Mark Jan 4 at 0:24
0

Is there still a manufacturer building 10000rpm hard drives or higher?

Yes.

There are still options available for enterprise customers, although most of these are drives that connect to SAS and are built into custom hot-swap enclosures. Many of them are less than 2TB capacity too.

Here are a few stores/links I could find with up-to-date information:

I am guessing that WD and Seagate no longer consider high RPM drives profitable in the consumer market against SSD storage; So they probably limited their production and sales of those drives to enterprise customers and entirely dropped the retail branding.

And below 2TB this doesn t gives advantages over ssd.

There are SSDs currently available that saturate the bandwidth of SATA or SAS. Even a high density 15K RPM drive can't overcome that limitation, so I don't think high RPM drives have much of an advantage over SSDs at any capacity.

| improve this answer | |
  • About ssd I was talking in terms of prices. And 7200rpm 20tb hdd are typically faster than those drives. – user2284570 Jan 3 at 18:23
  • @user2284570, The only requirement that you specified in your question is that you're looking for hard drives with "10000rpm or higher", so maybe you should update your question if other things like price or actual performance matter to you. – Romen Jan 3 at 18:54
  • Though I didn t see a 2TB ssd with a nand technology supportting more than 500 writes which is less than a DVD RW. Not even talking about nor based ssd. – user2284570 Mar 11 at 9:48
  • @user2284570, I have commented twice now that your original question is lacking these requirements you have mentioned in comments. Please update it and I will revise my answer to address the changes to your question. I would like to remind you that you have only asked one question: "Is there still a manufacturer building 10000rpm hard drives or higher?", and this answer addresses that specific question (yes). If you have more questions or requirements you must share them to get helpful answers. Or open a new question, since this one is still off-topic. – Romen Mar 11 at 13:40
  • @user2284570, Where are you getting 500 from? The warranty on many 2TB SSDs may be void around capacity * 500 TBW, but that doesn't mean the endurance of the technology is limited to 500 program/erase cycles. I can find several TLC NAND chips that can theoretically handle 3000 to 10000 program/erase cycles. Making a 2TB drive in 2.5" form factor doesn't really imply that there are smaller, more delicate NAND chips either. There's a lot of room in a 2.5" drive for using the larger, more durable MLC or SLC NAND. You'll just have to pay more for it. – Romen Mar 11 at 13:56

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.